Welcome...Thanks for your visit....
Blog ini berisi informasi seputar Bayi, Balita, Batita, Kehamilan, Ibu Menyusui, Keluarga, Kesehatan, Kuliner, dll
--- Scroll ke bawah utk melihat Index atau Klik Tab2 dibawah ini ...

Wednesday, July 28, 2010

How to Make Mehndi/Henna Cones

---

How to Make Henna Cones

Cones allow for precision control and fine, accurate lines. Interested in trying a mylar cone?
Purchase pre made cones or supplies to make your own cones 



Dengan menggunakan cone, presisi dan keakuratan desain bisa di control.
making cones
If you are using mylar tissue, keep hands moisturized, as you can not roll tissue mylar if the humidity is low and your hands are dry, too much static electricity makes the tissue unmanageable.


Jika menggunakan mylar tissue, usahakan tangan lembab, sehingga mudah untuk menggulung. Jika tangan kering akan timbul listrik statis sehingga susah utk menggulung nya. 
assemble tools for making cones

1. Assemble tools and supplies

  • Floraphane / Cellophane / Mylar / Basket Wrap. The thicker the product, the easier the conemaking.
  • Scissors
  • Tape (Scotch brand, red label)
  • Rotary cutter and mat if you have them
  • Little rubber bands
  • Long pointy item, chopstick, skewer

Yg diperlukan 

Floraphane / Cellophane / Mylar / Basket Wrap. 
Semakin tebal bahan yg digunakan semakin gampang membuat nya

Gunting


Isolasi 


Cutter dan tempat utk memotong jika punya


Karet gelang kecil/ bisa gunakan isolasi


Benda panjang berujung kecil, spt supit atau obeng
cut mylar for cones
2. Cut mylar / floraphane / cello wrap into 6x7 inch rectangles OR triangels
we prefer rectangles as they have an extra layer of material when rolled into the cone that helps to prevent leaks.


Potong mylar / floraphane / cello wrap menjadi 6x7 inch bentuk segiempat atau segitiga, baiknya bentuk segiempat krn akan ada extra area yg ketika digulung menjadi cone akan mencegah kebocoran.
roll mylar for cone
3. Begin rolling the cone
Grasp the upper right edge of the paper and fold left toward the center.
The middle of the wide edge will become the point of the cone.




Mulai gulung cone
Tarik bagian ujung atas kanan kertas dan lipat ke kiri menuju bagian tengah.
Bagian tengah dari ujung akan menjadi ujung cone.
cones4. Continue rolling till the cone is formed
Use a small push pull motion to make the cone the length and width you like.




Terus gulung sampai sampai cone terbentuk
Buat cone panjang dan lebar sesuai keinginan.
roll mylar coneRoll


Gulung
roll a bit moreRoll a little more


Gulung sedikit lagi
rolling cones5. When you come to the last bit, shift and pull the cone until the opening at the tip is the size you like. This can be adjusted until the opening is as small as a pin whole.




Saat kertas hampir habis, tarik cone sampai pembukaan ujung cone sesuai keinginan. Sesuaikan sampai lubang cone sekecil ujung jarum.
finishing the cone6. Tape down the little tail, the 1 1/2 inches left over at the tip.




Beri isolasi ujung cone, sekitar 1 1/2 inch dari ujung.
taping the cones7. Add a small piece of tape around the very tip of the cone, this will hold the teensy, tiny opening in place and prevent any slippage or unwrapping.




Tambahkan isolasi sekitar ujung cone, untuk menahan bergesernya kertas.
taping cones8. Tape over the seam on the outside using 2 pieces of tape approximately 1 1/2 inches long.
Using a long item such as a chopstick or long pointy scissors, put a piece of tape inside the cone as far down as you can get it, place another piece further up the inside of the cone to secure the inside of the cone and keep it from unrolling as you use it.





Isolasi lapisan luar, gunakan 2 buah isolasi sekitar 1 1/2 inch.
Gunakan benda panjang spt supit atau gunting berujung runcing, utk menempatkan isolasi di bagian dalam cone, tempatkan sedalam mungkin, kemudian tambahkan isolasi lagi di bagian agak atas utk mengamankan bagian lipatan kertas dalam cone dari tergulung ketika digunakan. 




complete cones
9. Your cone is now complete!
You can fill 3-4cones with henna paste if you begin with 20 grams of dry powder.




Cone sudah selesai !
3-4 cone dapat diisi henna paste terbuat dari 20 gram bubuk henna.
filling cones10. Fill the cone 1/2 to 2/3 rd's of the way with several Tablespoons of henna.




Isi cone 1/2 sampai 2/3 dengan henna paste, bisa gunakan sendok.
closing cone with rubberband11. Give the cone one twist just above the paste and seal with a tiny rubber band.




Simpul ujung cone, diatas paste yg diisikan, ikat ujung nya dengan karet gelang kecil.
rubberband on cone12. If the tip is too small cut a very small sliver off, test the width before cutting again.




Jika ujung cone terlalu kecil, potong sedikit, test apakah sesuai keinginan.

cutting the tips of the cones
Scoot the rubber band down the length of the cone as you use it to keep the pressure consistent. These cones will last all day at an event without unrolling, unraveling, or developing sloppy, large tips.

Geser karet gelang ke bawah cone saat digunakan seiring dengan keluarnya paste utk mendapatkan tekanan konsisten.


---

sumber : http://www.hennacaravan.com/